Cm870
Yesterday, (Subject: Cm870 ) 
Post: #1
Cm870
Driving This morning and the engine shut down on me on the interstate. I pulled over the hood saw nothing out the norm. I glanced before it shut down saw my water temperature about 200 which is not normal. I tried started it back and it started and instantly shut down. I plugged in insite and it’s only said engine shutdown without ignition off. Took down my filters and they are clean. Just changed them like 9k miles ago. Help please.
replyreply
Yesterday, (Subject: Cm870 ) 
Post: #2
RE: Cm870
Ecm going bad maybe?

https://www.rawze.com/forums/showthread.php?tid=8608

Oil preasure sensor is fine? What oil pressure insite shows you? Maybe low oil pressure shutdown?
replyreply
Yesterday, (Subject: Cm870 ) 
Post: #3
RE: Cm870
That’s the code


Attached File(s)Thumbnail(s)
   
replyreply
Yesterday, (Subject: Cm870 ) 
Post: #4
RE: Cm870
Tap on the ECM and then try to start it. Check the links that mention mikhh linked in the previous post and what to do.


User's Signature: Born and raised in Vyskonsin on milk, cheese, bread, and beer!
replyreply
Yesterday, (Subject: Cm870 ) 
Post: #5
RE: Cm870
Tried, didn’t work.
replyreply
Yesterday, (Subject: Cm870 ) 
Post: #6
RE: Cm870
Broken down in Monroe/Lousiana. I20. Anybody know anyone here or close by
replyreply
Yesterday, (Subject: Cm870 ) 
Post: #7
RE: Cm870
Check fuses and connection in battery box for ecm
replyreply
 Thanks given by: Nostalgic
Yesterday, (Subject: Cm870 ) 
Post: #8
RE: Cm870
Changed all the three fuse. Does the same thing.
replyreply
Yesterday, (Subject: Cm870 ) 
Post: #9
RE: Cm870
I don’t have voltmeter with me to check if ecm is getting power.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.