+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Cm870 (/showthread.php?tid=10491)
Pages: 1 2
Cm870 - 3406E - Yesterday
Driving This morning and the engine shut down on me on the interstate. I pulled over the hood saw nothing out the norm. I glanced before it shut down saw my water temperature about 200 which is not normal. I tried started it back and it started and instantly shut down. I plugged in insite and it’s only said engine shutdown without ignition off. Took down my filters and they are clean. Just changed them like 9k miles ago. Help please.
RE: Cm870 - mikkhh - Yesterday
Ecm going bad maybe?
https://www.rawze.com/forums/showthread.php?tid=8608
Oil preasure sensor is fine? What oil pressure insite shows you? Maybe low oil pressure shutdown?
RE: Cm870 - 3406E - Yesterday
That’s the code
RE: Cm870 - Volvo8873 - Yesterday
Tap on the ECM and then try to start it. Check the links that mention mikhh linked in the previous post and what to do.
RE: Cm870 - 3406E - Yesterday
Tried, didn’t work.
RE: Cm870 - 3406E - Yesterday
Broken down in Monroe/Lousiana. I20. Anybody know anyone here or close by
RE: Cm870 - Pigpen 2869 - Yesterday
Check fuses and connection in battery box for ecm
RE: Cm870 - 3406E - Yesterday
Changed all the three fuse. Does the same thing.
RE: Cm870 - 3406E - Yesterday
I don’t have voltmeter with me to check if ecm is getting power.