Threaded Mode | Linear Mode

Rawze

(Yesterday )Jwise Wrote: ...
1. I have created images inside of Insite of three trucks that I service.
...

That is NOT an image of the ecm at all. Not whatsoever. Its only a backup of the features and parameters / vehicle specific settings like the cruise control button addresses on the j1939, other dash button addresses, etc... most of which that you can already see. - Insite cannot take an actual copy of the ecm programming itself.

- The software needed to make an actual backup/image of the entire ecm programming is called Calterm.
info in copying the program from the ecm...
https://rawze.com/forums/showthread.php?...5#pid72945

Also,.. assume that those deletes are bad ... REAL bad!. more than 90% of all de-mandate programming that i review a year is absolutely harmful to the engine over time. Most of them have the ecm perpetually stuck in rapid DPF warm-up mode, over-spooling the turbo all the time, + scraping the pistons internally to generate extra heat for a system that is not there any more. It eventually takes out head gaskets, cracks the head or a piston,. etc.. because the ecm is stuck in this mode forever once those cans have been hollowed out.