N14 Injector Solenoid Failure
11-17-2026, (Subject: N14 Injector Solenoid Failure ) 
Post: #1
N14 Injector Solenoid Failure
Has anyone else come across this issue on a N14 Celect Plus? What's happening is that it keeps breaking the internal plunger on the solenoids and will cause an over fueling condition. It is always #4 injector. I've attached some pictures so you guys can see what I'm talking about.


   
   

I've checked cam, cam followers, push tubes, rocker arms and shaft, ohmed out harness and load tested it, pass-through as well, and ecm. Any suggestions guys?
replyreply
11-17-2026, (Subject: N14 Injector Solenoid Failure ) 
Post: #2
RE: N14 Injector Solenoid Failure
N14 should be in a museum by now... I hope like h#ell your not trying to haul freight with an old N14... you need to get rid of it and buy something 25+ years newer at this point.

DO NOT EXPECT any injectors or other parts to be worth 3 cents on those old antique engines these days.. You could buy 5000 injectors and maybe get 3 that last for more than 1-2 years.. that is how old and out of date and how little there is for reman for them any more... they are a dinosaur of the past.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: mikkhh
11-17-2026, (Subject: N14 Injector Solenoid Failure ) 
Post: #3
RE: N14 Injector Solenoid Failure
It is a customer's truck. I don't drive them. I just fix them.
replyreply
11-18-2026, (Subject: N14 Injector Solenoid Failure ) 
Post: #4
RE: N14 Injector Solenoid Failure
It makes me wonder if those 30+ year old injector design that have been re-manned to death are even compatible with ULSD fuel without rapidly wearing out.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
11-18-2026, (Subject: N14 Injector Solenoid Failure ) 
Post: #5
RE: N14 Injector Solenoid Failure
I would advise the owner to sell the machine, since there are people out there who pay the the same money for 20-30year old worn out scrap trucks as for 10 year old trucks that are "really complicated" and have dpf scr. I would advise the owner that 10 years old truck requires like 30-50k in repairs (like engine overhaul, new ecm) to make it last for a long time. 30 year old truck can not be depended on to make a living and it has lots of unexpected issues popping up any day.

Fuel economy wise the N14 engine itself is expensive to run, also the truck itself is most likely not aerodynamic. I know from guys who run 25tonne excavators around my area, even ten years old machines that have only EGR have huge fuel consumption difference between brands - saving 100 euros per day from reduced fuel costs adds up quickly, the guys who run old mechanically injected excavators they are wasting even more money on fuel and also repairs eat away all the profits. Most likely running 30 year old vs brand new excavator the brand new can pay for lease payment just from fuel savings with the fuel prices nowadays.

Back to topic of trucks - old truck has lots of wiring issues popping up too, new qenuine parts unavailable, crappy aftermarket and crappy remans only left besides used parts, rust is the real enemy also, there is no getting rid of it (yes you can sandblast the frame etc, but rust has like tiny pinholes in it, you can not get all out). Red engined trucks can be properly demanned so there is nothing to cry about those pesky cans and eg r valves.

What trucks to consider, CM870 871 era trucks with those HPI injectors are too old to buy and depend on nowadays, since supply of new genuine parts is drying up and prices are getting way too high, also the overall truck is like 20 years old so lots of issues ready to pop up.

Here where I live the yearly road tax for older pre emissions like 20th century trucks is 2000 euros per year, model year 2013 and up euro6 emissions is 1100 euros per year. If you want oversize, overload permits (the loads that pay the most), you MUST HAVE newer emissions truck.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.