Rawze.com: Rawze's ISX Technical Discussion and more
2010 isx cm871 - Printable Version

+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: 2010 isx cm871 (/showthread.php?tid=10819)



2010 isx cm871 - 3406E - 11-18-2026

Jakes, cruise control doesn’t work at all and speedo meter stays at 0. What’s the probable causes? Truck is a w900l


RE: 2010 isx cm871 - Rawze - 11-18-2026

Someone lost all the vehicle settings in the ecm after a re-flash or bad de-mandate?.


RE: 2010 isx cm871 - Nostalgic - 11-18-2026

VSS. The speed sensor on your transmission output. Speed zero = no cruise and no jakes.


RE: 2010 isx cm871 - 3406E - 11-18-2026

(11-18-2026 )Rawze Wrote:  Someone lost all the vehicle settings in the ecm after a re-flash or bad de-mandate?.

It’s not deleted at all.


RE: 2010 isx cm871 - 3406E - 11-18-2026

(11-18-2026 )Nostalgic Wrote:  VSS. The speed sensor on your transmission output. Speed zero = no cruise and no jakes.

I had a clue that was the problem, the same happened to my 9900 eagle and that was the culprit. Just wanted to make sure it wasn’t anything else. Thanks for reply