A/C hose lines

[runningman777]

On my 2010 387, the hoses would have to be custom made.

I cut the two ends off and took them to an auto air shop nearby.

They made me a hose to the length I specified by brazing ends onto my pieces that adapted to their hose.

Cost me around $200 and finally for the past year I am leak free.

Only issue is that since this is the liquid line it increased the amount of R134A that the system holds as the original line had a few short hose sections and was mostly steel line which has a smaller inside diameter than the hose. I had to add more than what the data plate calls for.