| 2006 cm870 air in injector leakdown test |
| 04-03-2026, (Subject: 2006 cm870 air in injector leakdown test ) Post: #5 | |||
| |||
| RE: 2006 cm870 air in injector leakdown test First crank with the starter and getting bubbles out of the hose going to the front actuator location. I crank it by hand and get a bubble just before it gets to C on the crank pulley. Between B and C is cylinder 1. Was getting air out this same cylinder when it had aftermarket injectors in it, but now has cummings injectors in the front bank. I think I still have air in the rear bank, focusing now on the front bank because that is where the cummings injectors are. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
2006 cm870 air in injector leakdown test - CTTOWING - 04-03-2026, RE: 2006 cm870 air in injector leakdown test - Rawze - 04-03-2026, RE: 2006 cm870 air in injector leakdown test - CTTOWING - 04-03-2026, RE: 2006 cm870 air in injector leakdown test - Rawze - 04-03-2026, RE: 2006 cm870 air in injector leakdown test - CTTOWING - 04-03-2026 RE: 2006 cm870 air in injector leakdown test - Rawze - 04-03-2026, RE: 2006 cm870 air in injector leakdown test - CTTOWING - 04-03-2026, RE: 2006 cm870 air in injector leakdown test - Rawze - 04-03-2026, RE: 2006 cm870 air in injector leakdown test - Rawze - 04-03-2026, RE: 2006 cm870 air in injector leakdown test - CTTOWING - 04-03-2026, RE: 2006 cm870 air in injector leakdown test - Rawze - 04-03-2026, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.


