CM871 turbo premature bearing failure

[Mrkentee]

(Yesterday )Rawze Wrote:  

(03-19-2026 )Mrkentee Wrote:  Some photos

That looks like an oil starvation issue to me. - Make sure the oil line feeding the turbo is not kinked or has collapsed internally... make sure the oil pressures in the engine are not lower than they should be.

Of course, I don’t want to hear that. My pressure is good on the gauge. I have a new line which I’m going to install and I’ll have a chance to take a better look at the old one.
I’ve heard of them getting restricted when they get hot.