Ecm issue
10-29-2025, (Subject: Ecm issue ) 
Post: #14
RE: Ecm issue
I hooked my diagnostic pc up to this with old ecm but not with old harness and cleared all the codes including the derate for scr and then I tried doing a forced regen and it worked exactly like it should? After it shut down I drove it a ways and everything works like it should now? I dont know what to think. Is it safe to drive it or not? No codes. Like I said I'm not much of a mechanic but it seems OK to drive.
replyreply


Messages In This Thread
Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - edgart - 10-27-2025,
RE: Ecm issue - Rawze - 10-27-2025,
RE: Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - Rawze - 10-27-2025,
RE: Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - JTX - 10-27-2025,
RE: Ecm issue - Rawze - 10-29-2025,
RE: Ecm issue - JTX - 10-29-2025,
RE: Ecm issue - Rawze - 10-29-2025,
RE: Ecm issue - JTX - 10-29-2025
RE: Ecm issue - Rawze - 10-29-2025,
RE: Ecm issue - JTX - 10-29-2025,
RE: Ecm issue - tree98 - 10-29-2025,
RE: Ecm issue - JTX - 10-30-2025,
RE: Ecm issue - Rawze - 10-30-2025,
RE: Ecm issue - JTX - 10-30-2025,
RE: Ecm issue - JTX - 11-01-2025,
RE: Ecm issue - JTX - 11-04-2025,
RE: Ecm issue - APC - 11-04-2025,
RE: Ecm issue - JTX - 11-05-2025,
RE: Ecm issue - Rawze - 11-07-2025,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.