Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / CM2250 shutting of while trying to take off

new reply
CM2250 shutting of while trying to take off
09-24-2025, (Subject: CM2250 shutting of while trying to take off ) 
Post: #7
ricoriverausmc Offline
Established  (0 Likes)  **

 		Posts: 10
Joined: Oct 2022
Thanks: 1
Given 0 thank(s) in 0 post(s)
RE: CM2250 shutting of while trying to take off
(09-23-2025 )Rawze Wrote:  
(09-23-2025 )tree98 Wrote:  Will it pass a leakdown test?.......

https://odysee.com/@rawze:d/isx-injector...e-cm2250:e

yes ... if it will not pass a leak-down test then that is the first place to start with it.

next is the de-mandate programming to ensue it is not killing the engine internally and now something has caught up with this fact. More then 90% of all de-mandate programming is harmful to the engine over time... some far worse than others.

Ok sir the programming was done through the guy in griffin but it has been a few years. Once the truck comes home I’ll get a copy of the program and email it to you. Could you pm me your email? Thank you
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: CM2250 shutting of while trying to take off - ricoriverausmc - 09-24-2025



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication