Was this cal swap right?

[Bigjc9009]

Okay final got into the ecm, with APC's help (much thanks). seeing lots of bad and stupid cal swaps on here i have to ask if someone knew what they were doing.

For reference engine is 2016 isb 6.7 b101 s/n 58671543

The cal that is in it is DT90302.11 the cal that was factory was DT90284.06?

The power is the same so im wondering if the new cal supersede the old one and are they close enough to use.

Plus was looking around the engine and things are unplugged and wrong on the egr and aftertreatment systems wondering if it was demandated? Other reason to suspect with erg unplugged, no codes for it, dpf was hollowed (not well), no nox sensor codes with the wires cut to them. The nox sensor controller is missing.