CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 08-23-2025, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non

07-29-2025, (Subject: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non )

Post: #12

mikkhh Offline

Offline

Established (48 Likes)

Posts: 101
Joined: Jan 2025

Thanks: 38
Given 48 thank(s) in 35 post(s)

Want to replace the EGR section with non

Knowing that back pressure sensor is used for correcting timing. Since that I have a question. How important is the angle of sensor on manifold and length of that tube between manifold and sensor?

This sensor "listens" or pressure fluctuations to determine detonation and excessive back pressure. How smart are those ecm s for listening to "noise" on back pressure sensor? And since this sensor is reading analogue pressure it can have some noise in it that will be filtered out before the data is acknowledged by ECM.

Return to Top | find

Thanks given by:

« Next Oldest | Next Newest »

Messages In This Thread

CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Redland1 - 07-25-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Pigpen 2869 - 07-25-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Rawze - 07-25-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Redland1 - 07-27-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - marek4792 - 07-25-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - marek4792 - 07-27-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - 3406E - 07-28-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - 3406E - 07-28-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Redland1 - 07-29-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - 3406E - 07-29-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Rawze - 07-29-2025,

Want to replace the EGR section with non - mikkhh - 07-29-2025

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Rawze - 07-29-2025,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2025 MyBB Group | Theme by Laughing Inc - Web Design