calterm help

[Rawze]

(04-07-2025 )gzuniga00 Wrote:  im needing help running calterm ive ran several other tuning software apps i.e hp tuners and efi live and tune very often with them, i need help demandating the engine with calterm its a 2012isx 15 cm2250, i dont know how to disable the egr and dpf out off the ecm, its a pulling truck that will never see public roads. i use efi live to tune with on the cummins platform but efi doesnt support removing emmisions any help will be apreciated thanks!!!

It sounds to me that you more likely need access to my mumble server
rather than my forum...

BE PREPARED to find out that you likely have some bad habits if you have been tinkering around with engines in HPT, EFI, Winols, Ezlink, and other trash tuning softwares, etc.


If you want to learn how things actually work ... how the the ecm, the engine, and the programming, etc.. then my Mumble (voice-chat) server is the place to learn and discuss it properly.

---------------
If someone wants to discuss and learn more about engine/ecu
programming, Calterm, etc...
That is what my mumble voice-chat server is for. It is far easier to
discuss engine settings, share my screen, review programming together,
etc. on mumble, than it is to just text chat about it on the forum.

Join us over on mumble. The mumble voice-chat app is available on
PC or phone, and that is all that is needed. The program is free, and
it is free to join and participate. On the PC, the program is called 'Mumble'.
On the smart-phone it is called 'Mumla', or 'Plumble', or 'Mumble', it
depends on the brand of phone.

The server is private and unlisted, so it has to be added manually the
first time.The server address to connect with is 'mumble.rawze.com'. Here
is a link to the mumble software for the PC: https://www.mumble.info/

Here is also some additional info for setting up mumble / getting onto my
private server specifically:
http://rawze.com/forums/showthread.php?t...63#pid2163