spec'ing a shed hauler - axle ratio etc

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 08-26-2025, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

spec'ing a shed hauler - axle ratio etc

03-05-2025, (Subject: spec'ing a shed hauler - axle ratio etc )

Post: #4

Rawze

Offline

Forum Reject (14722 Likes)

Posts: 11,871
Joined: Jun 2013

Thanks: 6262
Given 14722 thank(s) in 6521 post(s)

RE: spec'ing a shed hauler - axle ratio etc

(03-04-2025 )jmartin Wrote: Thanks for the info hooklift. What is the rpm range we should stay out of with the L9? Anything above 1500 or so ok for unloaded cruising? Is 1400 rpm getting into harmful territory? Obviously we would never run that low under any loaded conditions. Maybe we are overthinking it a little, but we only have one chance to set this spec and want to get it right for long term reliability.

1500-1900 is the optimum range to pull hard in for an ISX. 1650-1750 rpm provides the Least amount of wear, and your not luggung to an agonizing death below 1500 or so.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.

Return to Top | find

Thanks given by:

« Next Oldest | Next Newest »

Messages In This Thread

spec'ing a shed hauler - axle ratio etc - jmartin - 03-03-2025,

RE: spec'ing a shed hauler - axle ratio etc - hookliftpete - 03-03-2025,

RE: spec'ing a shed hauler - axle ratio etc - jmartin - 03-04-2025,

RE: spec'ing a shed hauler - axle ratio etc - Rawze - 03-05-2025

RE: spec'ing a shed hauler - axle ratio etc - tree98 - 03-05-2025,

RE: spec'ing a shed hauler - axle ratio etc - Rawze - 03-05-2025,

RE: spec'ing a shed hauler - axle ratio etc - jmartin - 03-06-2025,

RE: spec'ing a shed hauler - axle ratio etc - Rawze - 03-06-2025,

RE: spec'ing a shed hauler - axle ratio etc - DVT873 - 03-11-2025,

RE: spec'ing a shed hauler - axle ratio etc - DVT873 - 03-14-2025,

RE: spec'ing a shed hauler - axle ratio etc - jmartin - 03-14-2025,

RE: spec'ing a shed hauler - axle ratio etc - Btech - 03-14-2025,

RE: spec'ing a shed hauler - axle ratio etc - tree98 - 03-15-2025,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2025 MyBB Group | Theme by Laughing Inc - Web Design