Losing prime

[Rawze]

- Always run the overhead valve adjustment before doing an injector leak/bubble test because you will get leakage if the injector rockers are out of adjustment.


as far as loosing prime, maybe bad check valve at the electric fuel pump?. Perhaps sucking air somewhere?.

- I have seen where sometimes you have to pressurize the fuel tanks to 10 psi to find where it may be sucking air. CAUTION THOUGH!!!: NEVER TRY TO REMOVE THE FUEL CAPS WITH ANY PRESSURE ON THE FUEL TANKS AT ALL .. EVEN A LITTLE BIT ... AS IT CAN BREAK YOUR HAND(s) and put someone in the hospital!.