Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Tools

new reply
Tools
09-25-2016, (Subject: Tools ) 
Post: #4
arch stanton Offline
Established  (0 Likes)  **

 		Posts: 4
Joined: Nov 2015
Thanks: 0
Given 0 thank(s) in 0 post(s)
RE: Tools
I am using a 3/8 Dewalt 18 volt about 200 ft lbs i think the Milwaukee is about the same and the torque is about the same 3/8 or 1/2 so i got the 3/8 as the sockets are smaller and make the gun easier to get in tight spots they are much handier than air tools should have bought one sooner
Return to Top | find
replyreply
new reply


Messages In This Thread
Tools - donaldray - 09-24-2016,
RE: Tools - Hammerhead - 09-24-2016,
RE: Tools - donaldray - 09-25-2016,
RE: Tools - Old Driver - 09-25-2016,
RE: Tools - Waterloo - 09-25-2016,
RE: Tools - arch stanton - 09-25-2016
RE: Tools - Rawze - 09-25-2016,
RE: Tools - Hammerhead - 09-25-2016,
RE: Tools - Rig Wrench - 09-25-2016,
Batteries - donaldray - 09-25-2016,
RE: Tools - Waterloo - 09-25-2016,
RE: Tools - in2trux - 09-25-2016,
RE: Tools - Waterloo - 09-25-2016,
RE: Tools - Kevin7898 - 09-25-2016,
RE: Tools - donaldray - 09-25-2016,
RE: Tools - Rawze - 09-26-2016,
RE: Tools - Signature620 - 09-26-2016,
RE: Tools - in2trux - 09-27-2016,
RE: Tools - Rawze - 09-27-2016,
RE: Tools - arch stanton - 09-26-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication