Cam Bearings, Rebuilders Please Advise!!!

new reply

Threaded Mode | Linear Mode

Cam Bearings, Rebuilders Please Advise!!!

05-04-2018, (Subject: Cam Bearings, Rebuilders Please Advise!!! )

Post: #6

Waterloo Offline

HMR-Contrinbuting V.I.P. (4140 Likes)

Posts: 4,617
Joined: Oct 2014

Thanks: 5334
Given 4140 thank(s) in 2097 post(s)

RE: Cam Bearings, Rebuilders Please Advise!!!

From what I saw today, I would throw .60 in the oil pump, 6 dimes, and you should be ok. As long as oil is getting through you should be good, especially if you up the oil pressure. I would probably use it.

Return to Top | find

reply reply

Thanks given by:

Pramantha

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Cam Bearings, Rebuilders Please Advise!!! - Pramantha - 05-04-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - tree98 - 05-04-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - Pramantha - 05-04-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - Waterloo - 05-04-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - Pramantha - 05-04-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - Waterloo - 05-04-2018

RE: Cam Bearings, Rebuilders Please Advise!!! - Pramantha - 05-04-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - Rawze - 05-04-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - Pramantha - 05-04-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - Rawze - 05-04-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - Pramantha - 05-04-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - tree98 - 05-05-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - Rawze - 05-05-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - Pramantha - 05-05-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - Rawze - 05-05-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - dhirocz - 05-05-2018,

RE: Cam Bearings, Rebuilders Please Advise!!! - Waterloo - 05-05-2018,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.