Carbon Cleaning with Walnut Blasting |
12-23-2016, (Subject: Carbon Cleaning with Walnut Blasting ) Post: #8 | |||
| |||
RE: Carbon Cleaning with Walnut Blasting I would only do it if the head was off the engine, and just as a cleaning procedure. I was kinda thinking of doing this to the tube on the side of the motor, ( the one that says hot) and other parts that might have a soot build up. The parts would be off the motor. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Carbon Cleaning with Walnut Blasting - biscuits and gravy - 12-21-2016, RE: Carbon Cleaning with Walnut Blasting - Brock - 12-21-2016, RE: Carbon Cleaning with Walnut Blasting - Texasdude74 - 12-21-2016, RE: Carbon Cleaning with Walnut Blasting - Rawze - 12-22-2016, RE: Carbon Cleaning with Walnut Blasting - 74bassman - 12-22-2016, RE: Carbon Cleaning with Walnut Blasting - in2trux - 12-22-2016, RE: Carbon Cleaning with Walnut Blasting - Hammerhead - 12-23-2016, RE: Carbon Cleaning with Walnut Blasting - 74bassman - 12-23-2016 RE: Carbon Cleaning with Walnut Blasting - awe504 - 08-20-2017, RE: Carbon Cleaning with Walnut Blasting - Rawze - 08-20-2017, RE: Carbon Cleaning with Walnut Blasting - awe504 - 08-20-2017, RE: Carbon Cleaning with Walnut Blasting - Hammerhead - 08-20-2017, RE: Carbon Cleaning with Walnut Blasting - Jdphill62 - 06-28-2018, RE: Carbon Cleaning with Walnut Blasting - imalumberjack - 07-03-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.