| Bendix slack adjuster |
| 06-19-2025, (Subject: Bendix slack adjuster ) Post: #1 | |||
| |||
| Bendix slack adjuster When backing off a Bendix automatic slack adjuster, is it supposed to give resistance and make a clicking noise? Do I have to release the brakes when pushing back an automatic Bendix slack adjuster (push in the parking knobs)? | |||
| Yesterday, (Subject: Bendix slack adjuster ) Post: #2 | |||
| |||
| RE: Bendix slack adjuster Yes, resistance and clicking is normal, but manual adjustment should not be a regular occurrence outside of parts replacement on that particular wheel end. Get your air pressure at or above 90psi (be sure the truck is chocked properly) and release the park brake (push in the parking knobs, yes). - These few videos may help educate you a bit on the auto-slack adjusters... https://www.youtube.com/watch?v=QXA6GrJti8Q https://www.youtube.com/watch?v=vdtkJPPlQOU https://www.youtube.com/watch?v=60ZLWU-8e_U | |||
|
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.