Threaded Mode | Linear Mode

Ravenwood · 06-02-2025, **(Subject: PACCAR ESA 5.6 )**

Good day everyone, I’m trying to connect to my 2014 Kenworth for the first time and it keeps telling me it can’t connect. Nexiq 3 USB, I checked my DTC and voltage and resistance is as it should be. Pugs at my CECU’s are clean. I do have a code for chassis node power and some ABS codes on my display. I added some switches and gauges and would really like to activate them.
Thanks

Luckyjayb · 06-02-2025, **(Subject: PACCAR ESA 5.6 )**

Do you have the settings of ESA for the correct communication link?

Ravenwood · 06-03-2025, **(Subject: PACCAR ESA 5.6 )**

(06-02-2025 )Luckyjayb Wrote: Do you have the settings of ESA for the correct communication link?

I don’t know, 1st time using any other than Insite and Calterm.
You mean the DLA then yes it’s set to Nexiq USB link 3