| Fan Clutch Issue |
| 02-01-2026, (Subject: Fan Clutch Issue ) Post: #1 | |||
| |||
| Fan Clutch Issue 2016 cascadia, DD15. Fan clutch is stuck in engagement and will not release. Fan clutch replaced in the last 50k, can pull Airline and feed with aux air and the Fan clutch will release. Used power probe and when applying power and ground to solenoid the fan will release. When testing plug to solenoid neither power nor ground can be found. Where does the plug start and get power? I can not find an associated relay or fuse location. Any direction would be appreciated! | |||
| 02-02-2026, (Subject: Fan Clutch Issue ) Post: #2 | |||
| |||
| RE: Fan Clutch Issue could be the A/C system low on refrigerant and causing it to stay on all the time. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| Yesterday, (Subject: Fan Clutch Issue ) Post: #3 | |||
| |||
| RE: Fan Clutch Issue With the ignition on it should have ground on one pin, the other wire is supplied voltage from the cpc. The a/c pressure switch should be normally closed and the circuit will open to activate the fan. If you have a manual fan switch, this is normally open and the circuit will close to activate the fan. The cpc pin numbers on yours may not match this diagram, but there are plenty of documents on google that should get you close enough to be able to figure it out | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.


