+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Installing PTO switch (/showthread.php?tid=10202)
Installing PTO switch - Konstantin - 07-07-2025
Good morning,
I have 2009 Freightliner Cascadia with CM871 engine. I tried to find a way to activate PTO through cruise control and all other buttons. I activated all features in Insite. I think I need to physically install PTO switch. Could anyone point me in a right direction of where to start? Thank you.
RE: Installing PTO switch - Rawze - 07-08-2025
(07-07-2025 )Konstantin Wrote: Good morning,
I have 2009 Freightliner Cascadia with CM871 engine. I tried to find a way to activate PTO through cruise control and all other buttons. I activated all features in Insite. I think I need to physically install PTO switch. Could anyone point me in a right direction of where to start? Thank you.
It should be possible to activate PTO, usually via the 'cruise on + cruise resume' buttons being pressed at the same time for 5 seconds. If not, then it might be disabled in the areas of the programming that you cannot get to via Insite for your particular program.