+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Cm2250 overhead set (/showthread.php?tid=5430)
Pages: 1 2
RE: Cm2250 overhead set - jimeneztrans84 - 12-16-2019
I'm just going to stick with my 3/8 torque wrench and doing 15ft lbs. I can hear the click on that atleast. Just gotta figure out the dial indicator on engine brake side note.
RE: Cm2250 overhead set - Lonestar10 - 12-17-2019
its all a right off buy the right tools for the job and call it a day. think i spent about 350 bucks for a Nm dial type torque wrench for injectors (cm871) a regular in lb torque wrench and every other tool needed to do an overhead. and i would do it all over again as everything is just that much easier. also a torque wrench is most accurate in the middle of its torque span so a 100 FT/lb Twrench is most accurate at 50lbs apply that to any torque wrench.