+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: GUIDANCE (/showthread.php?tid=2122)
Pages: 1 2
RE: GUIDANCE - Ragindirt - 10-14-2017
Brought her home yesterday, going to start pulling erg shi#t off and clean, buy new sensors; if the cans are not beyond cleaning I'll keep mandate, if so mm time.
Nov 1st go back to tanker and hopper, maybe a little dry bulk if I can come up with an easy system to flip flop gear pump and blower.
Could make a frame for both and flip flop drive shaft, but would be a 1500# addition.
Need to find a blower, Damn just the thought of drilling out the huck bolts where blower needs to be mounted makes me want to bag that idea and stick to tanker, and hopper.
RE: GUIDANCE - Waterloo - 10-14-2017
If you are putting a blower on, that means idling. MM time, because you will kill your motor idling. Soot baby, SOOT. Do you have an inline with all of the software? I did my MM in my driveway, still have the how too on file that I can send you if you want.
RE: GUIDANCE - Ragindirt - 10-14-2017
Please do sir, and if needed at first I'll get with Mr. Matt let him link up to it somehow.
Have a friend when insight, maybe he can do it with right program.
RE: GUIDANCE - Ragindirt - 10-14-2017
Have all the plate pic if I can figure out how get a photo on here. Seen a post one time put can't remember where.
RE: GUIDANCE - Waterloo - 10-14-2017
(10-14-2017 )Ragindirt Wrote: Have all the plate pic if I can figure out how get a photo on here. Seen a post one time put can't remember where.
I shot you a PM, send me your email.