+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Slop when I let off the pedal (/showthread.php?tid=10682)
Pages: 1 2
RE: Slop when I let off the pedal - Redland1 - 09-01-2026
(09-01-2026 )Rawze Wrote:(09-01-2026 )Redland1 Wrote: ...
So instead of aligning the yokes with each other, offsetting the one at the carrier bearing about 2 degrees or did I understand wrong ?
not the yoke(s) ,... the bearing housing placement to the undercarriage.
Ok, got it now. Also I’ve been getting a pretty good vibration, well actually two and one being the engine (need to replace the dampener I’m assuming). The second vibration is felt the strongest from 60 mph and above and can be felt through the steering wheel. What should I be checking out ?